Skip to content
Up to 45% OffEnds: Nov 19

10 Free Samples • 2-Day Rush $5

Financing Available

Fit Or Free Guarantee

Free Shipping

60-Day Satisfaction Guarantee

Blindster
AccountCart
Bestseller
Shown in White Pearl

Deluxe Light Filtering Solar Shades

4.7(614)
, read reviews134Q&A

SKU: BLN-DLSS

Made to order, ships in 1–3 business days.

Unbeatable Price Guarantee

Color: White Pearl

$ - Essential

$$ - Classic

Mount: Not selected

Inside Mount
Inside mount shades are installed inside the window opening. Enter the exact size of the window opening NOT the size of the shade. The factory will make a small deduction from your width to allow space for the hardware and operation.
Outside Mount
Outside mount shades are installed outside the window opening to trim, a wall, or a door. Enter the exact size of the shade you want to order. The factory will make no deductions.

Size: 24" W × 36" H

Width
Height

Measurements to the nearest 1/8 inch.

Fit or Free Guarantee. If for any reason your window coverings don't fit, even if you make a mistake in measuring, we'll remake them in the size you need free of charge.

Openness Percentage: Not selected

10% Openness
10% provides the clearest view to the outside while blocking 90% of the sun's UV rays to reduce glare and heat. Note that dark colors are more transparent than light colors.
5% Openness
5% will provide you with 95% blockage of the sun's UV rays, reducing glare and heat. Please note that dark colors are more transparent than light colors.
3% Openness - Top Seller!
3% is the ideal choice if you want to retain a view to the outside but still block as much glare & heat as possible. Note that dark colors are more transparent than light colors.
1% Openness
1% is considered a room darkening fabric. While it's not blackout, it does not offer an outside view and blocks 99% of the UV rays.

Lift Type: Not selected

Cordless Spring Roller
With the Cordless Spring Roll, a hidden spring inside the convoluted paper roller tube releases tension when you pull on the shade's hem, allowing you to easily raise and lower your shade.
Nylon Beaded Chain
A Nylon Beaded chain provides a clean look and loops around a tensioning mechanism attached to the wall or window frame. Pulling this chain hand over hand in a continuous fashion allows you to easily lift and lower your shade.
Metal Beaded Chain
A Metal Beaded chain provides a clean look and loops around a tensioning mechanism attached to the wall or window frame. Pulling this chain hand over hand in a continuous fashion allows you to easily lift and lower your shade.
Cordless Precision Lock
Adjust shade more accurately to any desired height. Pull down, or gently push up to set the shade exactly where you want it.
Battery-Powered Motorized
Efficiently raise and lower your shade with Motorized Lift. Perfect for hard-to-reach windows, a battery-powered remote is all that is needed to lift and lower your shades.

Roll Orientation: Not selected

Standard Roll
Fabric rolls off the back of the roller (closest to the window).
Reverse Roll
Fabric rolls off the front of the roller (away from the window).

Cassette Valance: No

No
Roller will be visible at the top.
Yes
A Cassette Valance conceals the roller tube at the top of the window and a fabric insert covers the face of the cassette. You cannot side mount with this option.

Name your window

Optional
Quantity1

Pay over time with PayPal at checkout.

Total$—

From our customers

Real windows, in real homes

Product Information

This sleek solar shade will help protect your furniture, your energy bills, and most importantly, your view. The amount of visibility and UV protection is determined by the openness percentage. The lower the percentage, the more UV rays the shade will block. Or bump it up to have more view to the outside. Choose to motorize for out-of-reach windows, or keep it simple with a cordless lift. A variety of custom options lets you make this shade perfectly for you! 

  • Openness Percentage Range: 1%-10%
  • Go Cordless!
  • Smart Option: Motorize
See what makes it special →

If the bright light and harsh glare of the sun have you down but you don't want to lose your view and block all the light, then our light filtering solar shades can help. Get the best of both worlds with the unique solar screen fabrics of our Deluxe Light Filtering Solar Shades that block between 90-99% of incoming light while still letting you see your view outside. Solar screen material is woven in such a way that most UV rays and direct sunlight are blocked and the remaining light is softened throughout the room. Perfect for windows with direct sun and anywhere you want light to be evenly diffused into the room.  Choose from either solid colors or our new organic-look flaxen weave designs.

Get to know this shade:

  • Choose the "openness" level of the fabric that works best for you – 1%, 3%, 5% or 10%
  • The higher the openness level, the more light will come through and the more view-through you have
  • All fabric options provide daytime privacy only (you can see out but others can't see in)

Why you'll love this shade:

  • Reduced cooling costs by blocking the heat and UV rays from incoming sunlight, preventing premature fading of furnishings
  • Unlike fabric shades that cover the window, you can still see through solar shades during the daytime
  • Neutral colors and contemporary look blend well into any decor, or upgrade to one of the flaxen-look designs for a more organic look
  • Beaded chain or cordless spring roller lift options at no cost, or upgrade to cordless precision lock or battery-powered motorized lift for convenient operation
  • Greenguard Gold certified for indoor clean air quality with extra low levels of VOCs and other chemicals
  • Fire retardant, fragrance free and non-toxic shade material
  • Meets all CPSC requirements for child safety

Key considerations:  

  • Solar shades do not provide privacy at night (a lit room will be visible from the outside)
  • You can use a second window treatment if nighttime privacy is needed
  • The fabric width will be up to 1 3/8" narrower than the ordered width in order to accommodate the mounting brackets and control mechanisms at the top of the shade

Great for:Living RoomOfficeKitchenDining RoomEntry WayUtility Room

  • Easy to Clean
  • Child & Pet Safety (cordless)
  • Eco-Friendly

Made to order, ships in 1–3 business days.

Specifications & Restrictions

Width
15" – 114"
Height
24" – 108"
Min depth for inside mount

2 ¼ inches

Min depth for inside mount (with valance on all lift types EXCEPT Cordless Precision Lock)

3 inches

Min depth required for inside mount (with valance and Cordless Precision Lock)

2 ¼ inches

Depth required for flush mount (without a valance)

3 inches

Depth required for flush mount (with valance on all lift types EXCEPT Cordless Precision Lock)

3 ¼ inches

Min depth required for inside flush mount (with valance and Cordless Precision Lock)

3 inches

Min Flat Space For Outside Mount (without valance)

2 ¼ inches

Min Flat Space For Outside Mount (with valance)

3 inches

Inside Mount Width Deduction

Approximately 1/8 inch

Fabric Width Deduction

Approximately 7/8 to 1 3/8 inches (applies to all solar shades regardless of mount type)

6 channel remote control required to operate motorized shades

Remotes from other companies will not operate Blindster shades

All shades are pre-programmed at the factory to operate on channel 6

Each remote can be programmed to control up to 6 shades

Remote Control Range

65 feet

Easy Rechargeable Feature

Battery wand is integrated into the roller mechanism of all motorized shades

Charger included for Motorized Shades

1 Charger per order included

*Recharge time on a shade is 5 hours, chargers are not meant to be plugged into the shade long term.

This product's motorized remote is NOT compatible with the following products:

Deluxe Cellular Shades categories & Premium Solar Shades categories

Restrictions

  • Cassette not available with the reverse roll option
  • Optional cassette valance cannot be mounted at the sides. It must be mounted at the back or at the top of the cassette
  • This product's remote for Motorized lift is NOT compatible with the motorized lift option of our Premium Solar Shades
  • Cordless Precision Lock must be ordered with a Cassette Valance

How to Measure

How to Measure: Inside Mount

3 min read

Let's make sure an inside mount will work for your window!  Using a metal tape measure, first check if you have sufficient depth:

  • Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. To mount the brackets, the depth at the top of the window must be at least 2 1/4" for shades without a cassette valance and 2 5/8" for shades with a cassette valance. To have a flush mount (meaning the shade is fully recessed in the window opening) the depth must be at least 3" without a cassette valance and 3 1/2" for shades with a cassette valance. If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.

How to Measure:

Let's start with the Width:

  • Measure inside of the window opening/frame from left to right at the top of the opening to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

  • Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.

Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/8" to the width of the top of the shade to accommodate the installation brackets. 

The fabric portion of the shade will be approximately 1" – 1 1/2" narrower than the ordered width (up to 3/4" gap on each side between the window opening and the edge of the fabric). When maximum light blocking is needed, consider an outside mount or an alternate product. 

No deductions will be made to the ordered height. 

How to Measure: Outside Mount

3 min read

Before you start measuring, decide where above your window opening you want to mount your shade. You will need at least 1 1/2" of flat vertical space above the window to mount the brackets for shades without a cassette valance, or at least 2" for shades with a cassette valance. Follow the directions below for where you'd like to install your shade.

If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.

Your ordered width will be the "tip to tip" measurement, which is the widest part of the top of the shade including the brackets and cassette valance (if applicable). The fabric portion of the shade will be approximately 1" – 1 1/2" narrower than the ordered width (up to 3/4" on each side. If you wish to have the fabric cover a specific width, we recommend ordering slightly wider – just ensure that you have enough horizontal space to mount the shade.

Width:

  • Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2-3" on each side of the window opening for the best light control and appearance.
  • Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.

Height: 

  • Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. Since the shade spools onto the roll, it does not need to be installed high above the window to have the shade fabric fully clear the window.
  • Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.

Width:

  • Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2-3" on either side of the window opening for the best light control and appearance.
  • Using a metal tape measure, measure from left to right including any desired extra space on each side of the window—that is your ordering width.

Height: 

  • Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. Since the shade spools onto the roll, it does not need to be installed high above the window to have the shade fabric fully clear the window.
  • Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.

Note: The shade fabric may rub against the trim when operating. If your trim is more than 1/2" thick, consider adding shims (not included) under the brackets for additional clearance. If your trim is 3/4" or thicker, we recommend ordering the shade with the reverse roll option.

Width:

  • We don't normally recommend mounting roller shades directly on the trim unless your window configuration doesn't allow for other placements. Your ordered width will be the bracket to bracket measurement which cannot exceed the width of your trim. However, the fabric portion of roller shades is always narrower than the ordered width, and will not extend to the edges of the trim.
  • Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim.  That is your ordering width. 
  • Note that the fabric portion of the shade will be narrower than your ordered width.

Height: 

  • Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height.

Width:

  • Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the shade about 2-3" wider for better light control.

Height:

  • Consider how far above the window trim piece you would like to install your shade but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the shade to be, using the same extra space below the window trim piece as you used above. That is your ordering height.

Note: This product is not available with hold down brackets (for attaching the bottom of the shade to the door to prevent swaying). We recommend considering a different product if installing on a door where the bottom of the shade is likely to swing back and forth.

How to Install

How to Install: Inside Mount

2 min read

Let's make sure you have what you need!  

What came with your blinds?

  1. Installation brackets
  2. Motorization lift supplies*
  3. Tension device and loop control*

What else will you need in order to complete the installation?

  1. Rechargeable drill with 5/64" and ¼" bit
  2. Phillips screwdriver
  3. Pencil
  4. Tape measure
  5. Ladder

*If applicable to your order. 

Please note that brackets and componentry may be updated or substituted over time due to availability or product improvements.

Download the applicable PDF below for a complete step by step guide on how to install your inside mount blinds based on the ordered lift type. 

Download printable instructions (PDF) (opens in a new tab)

How to Install: Outside Mount

4 min read

Let's make sure you have what you need!  

What came with your blinds?

  1. Installation brackets
  2. Motorization lift supplies*
  3. Tension device and loop control*

What else will you need in order to complete the installation?

  1. Rechargeable drill with 5/64" and ¼" bit
  2. Phillips screwdriver
  3. Pencil
  4. Tape measure
  5. Ladder

*If applicable to your order. 

Please note that brackets and componentry may be updated or substituted over time due to availability or product improvements.

Download the applicable PDF below for a complete step by step guide on how to install your outside mount blinds based on the ordered lift type. 

Download printable instructions (PDF) (opens in a new tab)

Read More About This Product

Custom Light Control with a View

Enjoy sunlight without sacrificing comfort. Deluxe Light Filtering Solar Shades block 90% to 99% of UV rays while maintaining your view to the outside. Choose from four openness levels, 1%, 3%, 5%, or 10%, to balance glare reduction, heat control, and visibility. Ideal for sunny windows, these solar shades soften light and protect your furnishings from fading.

Stylish Options for Every Window

With a clean, modern design and a wide range of neutral colors or flaxen weave fabrics, these solar shades complement any decor. Select from multiple lift options, including cordless spring roller, cordless precision lock, beaded chain, or motorized lift with remote. Add a cassette valance with fabric insert for a sleek, finished look.

Built for Efficiency and Safety

These shades are Greenguard Gold certified, fire retardant, and free of harmful chemicals. The high-performance screen fabric reduces cooling costs and supports healthy indoor air quality. All options meet CPSC child safety standards, making them safe for every room in the home.

Easy Fit with Inside or Outside Mount

Whether you're going for a flush inside mount or a broader outside mount, these shades are custom-cut to your exact size. Factory deductions are made for proper fit, and installation is straightforward with all hardware included. For full privacy or minimal light gaps, pair with a second window treatment if needed.

Related Videos

  • Product Expert Review - Deluxe Light Filtering Solar Shades

  • Customer Experience - Blindster Deluxe Light Filtering Solar Shades

  • Solar Shades - Maintain Your View

  • Cordless Blinds and Shades

  • Motorized Shades

  • How to Measure for Inside Mount Solar Shades

  • How to Measure for Outside Mount Solar Shades

  • How to Install Roller and Solar Shades

  • How They're Made - Solar Shades

Questions & Answers (134)

Reviews4.7out of 5based on 614 reviews

Customers also bought (24" × 36")