2 Inch Premium Cordless Faux Wood Blinds Questions & Answers
What shoppers asked about it, answered by our team.
Customer Reviews (2,500)Customer Questions
519 questions · page 40 of 52
In the color options I did not see "white". Do you offer white as a color?
Asked by Jack ·
Thank you so much for your interest! The white colors are in Group A.
Answered by Blindster ·
How do you attach these to metal doors?
Asked by David L ·
Thank you so much for your interest! The wood blinds can mount to metal doors. However, our blinds come with normal sheetrock/wood screws. You will have to go to your local hardware store to get the correct screws for your door.
Answered by Blindster ·
I have a sun room with 4 sliding glass doors, two are 8' wide and 2 are 5' wide. I would like to have 2" wide blinds to match window coverings. What would you suggest?
Asked by Verna ·
Thank you so much for your interest! You can put 2" blinds on sliding glass doors but they are not the most common choice. Horizontal blinds are not typically made to be lifted regularly. Instead, they are intended to be tilted open and closed. Obviously, you would have to raise the blinds to go through your doors. You would need to put 2 separate blinds or a 2on1 headrail over the door so you could just raise 1 side. Please call 888-256-8672, option 1 for sales to get more information.
Answered by Blindster ·
I need a blind for my back door. Do you have the bottom rail with some kind of anchor attached so I will not swing out when we open and close the door? If so, what do I request when I order?
Asked by Sharon ·
Thank you so much for your interest! The anchor you are describing is called hold-down brackets. They are available on these blinds and all horizontal blinds. You will see them listed as an option when ordering the blinds. Please call 888-256-8672, option 1 for sales to get more information.
Answered by Blindster ·
Our bedroom window measures inside at 70"x70". Is that too large for one blind? We currently have two separate blinds installed, but would prefer one if possible. What do you recommend? Thank you.
Asked by Natalie ·
Thank you so much for your interest! You can put one blind in the window. However, we don't recommend it if you are going to lift the blind every day. Fauxwood blinds are heavy and should be lifted only for cleaning. Also, in general, horizontal blinds are made to be tilted open and closed rather than raised. Please call one of our sales agents at 888-256-8672, option 1 for sales to get more help in making this decision.
Answered by Blindster ·
I have a window opening of 106 1/4". Do you have any blind options for a window that size
Asked by Joe ·
Thank you so much for your interest! Normally you would put 2 or blinds inside the window opening (number depends on how your windows are separated, usually 3 at this size). Our Premium Fauxwood Blinds are available with a 2on1 or 3on1 option. This means that 2 or 3 blinds will hang from 1 headrail. The advantages are that you only have to hang 1 unit and the gaps are smaller. If you choose to be more than 1 blind in the window you can then cover the headrails with a common valance. At this size the valance would be spliced in two (miter cut in the center). To measure for more than 1 blind inside the window opening: Measure the overall width (smallest width at the top, middle & bottom of the window). Then measure from center mullion (strips that separate the windows, usually metal) to the outside of the window opening on both sides and from center mullion to center mullion if there is a middle blind. All 2 or 3 width measurements should add back to the overall width. Order the blinds are inside mount and the normal factory deductions for inside mount will make the blinds fit perfectly. Be sure the tell us you want a common valance (put the note on the line of each blind in the window) and the overall width size at the top of the window. Call one of our sales agents at 888-256-8672, option 1 for sales and they can help you.
Answered by Blindster ·
Can one get faux wood blinds in brown color?
Asked by Sally ·
Thank you so much for your interest! We do have some colors that look like stained wood in this category. There are more options in the Premium Fauxwood Blinds. Please be sure to get samples to see the exact colors.
Answered by Blindster ·
What does the vallance look like for this window?
Asked by Caleb ·
Thank you so much for your interest! The valance is 3 1/2" wide and covers the metal headrail (contains all the mechanisms) at the top of the shade. It has a crown molding profile and attached to the headrail with magnets. The standard inside mount valance is flat. The standard outside mount valance will have returns (side pieces that cover the side of the headrail). There are photos on the product page.
Answered by Blindster ·
how do I order 2 on 1 head rail for 2" faux wooden blinds? Total width of window is 107" height is 59". I would want the 2 blinds to fit very close together.
Asked by TOM ·
Thank you for your interest! You would enter the total width of the window (smallest measurement at the top, middle & bottom of the window in 1/8 inch increments). Then choose the 2on1 headrail option and put in the correct widths for each window (if necessary, most of the time you would just split it equally for a 2on1 which will be the default). There will be a 1/4" gap between the blinds. If you order 2 separate blinds you would need to have a 1/2" gap between the blinds. Please call 888-256-8672, option 1 for sales and a sale agent will be happy to take your order.
Answered by Blindster ·
How is the system powered? Battery? And if so what type/how many?
Asked by Katie ·
Thank you so much for your interest! The cordless system is not motorized. It hass a pulley system that allows you to move the blind up and down by re-positioning the bottomrail. No power needed.
Answered by Blindster ·