Skip to content
Up to 45% OffEnds: Nov 19

10 Free Samples • 2-Day Rush $5

Financing Available

Fit Or Free Guarantee

Free Shipping

60-Day Satisfaction Guarantee

Blindster
AccountCart
Shown in Montclair Snow

LEVOLOR 3 Inch Light Filtering Sheer Shades

4(1)
, read reviews2Q&A

SKU: BLN-LFSS3

Made to order, ships in 5–7 business days.

Unbeatable Price Guarantee

Color: Montclair Snow

$ - Essential

Mount: Not selected

Inside Mount
Inside mount blinds are installed inside the window opening. Enter the exact size of the window opening NOT the size of the blind. The factory will make a small deduction from your width to allow space for the hardware operation.
Outside Mount
Outside mount blinds are installed outside the window opening to trim, a wall, or a door. Enter the exact size of the blind you want to order. The factory will make no deductions.

Size: 24" W × 36" H

Width
Height

Measurements to the nearest 1/8 inch.

Fit or Free Guarantee. If for any reason your window coverings don't fit, even if you make a mistake in measuring, we'll remake them in the size you need free of charge.

Lift Type: Not selected

Continuous Cord Loop
Continuous Cord Loop provides a clean look and features a cord that loops around a tensioning mechanism attached to the wall or window frame. Pulling this cord hand over hand in a continuous fashion allows you to easily lift and lower large or heavy shades.
Cordless
Simply grab the bottom rail to lift and lower your blind or shade.
Battery-Powered Motorized
Efficiently raise and lower your shade with Motorized Lift. Perfect for hard-to-reach windows, a battery-powered remote is all that is needed to lift and lower your shades.

Fabric Covered Headrail: Not selected

No
Color-coordinating metal headrail
Yes
Upgrade to a fabric-covered headrail for a seamless look top to bottom. Coordinating fabric is inlayed into the headrail

Magnetic Door Brackets (Hold Downs): Yes Magnetic Door Brackets

Yes Magnetic Door Brackets
These are used when outside mounting to a door. The brackets secure the bottom rail of the blinds to the door in order to prevent swaying.
No Magnetic Door Brackets
Door Brackets (Hold Downs) are not required for the normal operation of this product.

Spacer Blocks: Not selected

No Spacer Blocks
Spacer Blocks are not required for the normal operation of this product.
Yes Spacer Blocks
Spacer blocks add clearance for the blind if the trim around your window interferes. Spacer blocks will add an extra 1/2" of depth.

Extension Brackets: Not selected

No Extension Brackets
Extension brackets are not required for the normal operation of this product.
Yes Extension Brackets
Provides added clearance and allows the shade to operate around any obstructions. Extends headrail up to 3 3/16 inches away from the wall.

Name your window

Optional
Quantity1

Pay over time with PayPal at checkout.

Total$—

From our customers

Real windows, in real homes

Product Information

Give your windows the royal treatment with elegant sheer shadings from LEVOLOR. These shades bring not only sophistication but also dynamic light control to every room – the unique design of sheer material diffuses sunlight and gently spreads it around the room, while the 3" fabric vanes can be rotated to provide greater privacy and light control.

See what makes it special →

Discover a new way to illuminate your home with daytime sunlight gently glowing through your new LEVOLOR sheer shadings. These unique shades feature two layers of sheer material connected by horizontal fabric vanes in between. The sheer portion of the shade diffuses incoming light and turns harsh direct light into an exquisite glow throughout the room. When privacy and more light control is needed, the fabric vanes can be rotated closed. The large 3" vanes provide a wide-open view to the outside and are especially well proportioned for larger windows. Choose from an array of decor-friendly colors to bring a new level of elegance to your home.

Get to know this shade:

  • Light filtering vanes are 3" wide and are suspended between front and back layers of sheer fabric
  • Shades can be fully open, fully closed or lowered with the fabric vanes open to welcome in sunlight and unveil your view
  • Shades are operated with your choice of continuous cord loop, cordless lift, or motorized operation

Why you'll love this shade:

  • Get two types of light control with sheer fabric that diffuses sunlight while maintaining your view, or adjustable light-filtering privacy fabric vanes
  • Immerse your room in a soft light when you want, or rotate the shade closed to dampen incoming light
  • LEVOLOR sheer fabric provides better view-through than other brands, with no moiré effect in the window
  • Color-coodinated metal headrail included standard, or choose the optional fabric covered headrail for an inclusive, designer look
  • For push-button operation, upgrade to motorized control with hub to connect to home automation and app-driven control
  • Meets all CPSC cord safety requirements

Key considerations:

  • The fabric vanes on cordless shades will open to approximately a 45 degree angle; vanes on shades with other lift systems will open more horizontal
  • A remote is required to operate motorized shades; when ordering a home automation hub, a remote is still recommended as a backup
  • Child & Pet Safety
  • Privacy

Made to order, ships in 5–7 business days.

Specifications & Restrictions

Width
12" – 96"
Height
24" – 96"
Min Depth for Inside Mount

1 inch

Depth required for flush mount

3 ¼ inches

Min Flat Space For Outside Mount

1 1/8 inches (std bracket); 1 ¼ inches (ext bracket)

Headrail Dimensions

3 ¼ inches (height) x 3 1/16 inches (depth)

Inside Mount Width Deduction

3/16 inch 

Fabric Width Deduction

1 inch (Inside Mount); ¾ inch (Outside Mount)

15 channel remote control required to operate motorized shades

Remote will only operate LEVOLOR motorized roman shades; other Blindster remotes will not operate the shades

REMOTE CONTROL RANGE

98 feet

EASY RECHARGEABLE FEATURE

Powered by an integrated, rechargeable lithium-ion battery

CHARGER REQUIRED TO OPERATE MOTORIZED SHADES

At least 1 charger needs to be ordered

*Recharge time on a shade is 5 hours, chargers are not meant to be plugged into the shade long term.

HUB OFFERED FOR MOTORIZED SHADES

Optional hub syncs to Wi-Fi to enable app control and smart home integration

*Connects up to 30 shades

Restrictions

  • Widths 26" or less have a max height of 60"
  • When sheer shades are installed side by side, vane alignment can be achieved within 1/4" only if the room locations are the same. All other specifications must match
  • When ordering a hub, at least one remote must be ordered as well

How to Measure

How to Measure

Let's make sure an inside mount will work for your window!  Using a metal tape measure, first check if you have sufficient depth:

  • Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. To mount the brackets, the depth at the top of the window must be at least 1". To have a flush mount (meaning the shade is fully recessed in the window opening) the depth must be at least 3 1/4". If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.

How to Measure:

Let's start with the Width:

  • Measure inside of the window opening/frame from left to right at the top of the opening to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

  • Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.

Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 3/16" to the width of the top of the shade to accommodate the installation brackets. 

The fabric portion of the shade will be approximately 1" narrower than the ordered width (up to 1/2" gap on each side between the window opening and the edge of the fabric). When maximum light blocking is needed, consider an outside mount or an alternate product. 

No deductions will be made to the ordered height. 

How to Measure

Before you start measuring, decide where above your window opening you want to mount your shade. You will need at least 1 1/8" of flat vertical space above the window to mount the brackets (1 1/4" if using extension brackets). Follow the directions below for where you'd like to install your shade.

If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.

Your ordered width will be the width of the cassette at the top of the shade. The fabric portion of the shade will be approximately 1" narrower than the ordered width (up to 1/2" on each side). If you wish to have the fabric cover a specific width, we recommend ordering slightly wider – just ensure that you have enough horizontal space to mount the shade.

Width:

  • Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2-3" on each side of the window opening for the best light control and appearance. 
  • Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.

Height: 

  • Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. Since the shade spools onto the roll, it does not need to be installed high above the window to have the shade fabric fully clear the window. 
  • Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.

Width:

  • Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2-3" on either side of the window opening for the best light control and appearance.
  • Using a metal tape measure, measure from left to right including any desired extra space on each side of the window—that is your ordering width.

Height: 

  • Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. Since the shade spools onto the roll, it does not need to be installed high above the window to have the shade fabric fully clear the window.
  • Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.

Note: The shade fabric may rub against the trim when operating. If your trim is more than 1/2" thick, consider adding spacer blocks when ordering. These go behind the installation brackets to position the shade away from the wall and prevent the shade from hitting the frame. Spacer blocks add an additional 3/8" of depth for installation. For larger obstructions, extension brackets can also be ordered. These are used in conjunction with the standard installation brackets to position the shade away from the wall and prevent the shade from hitting the frame. Extension brackets add up to 4" of additional depth for installation.

Width:

  • We don't normally recommend mounting zebra dual shades directly on the trim unless your window configuration doesn't allow for other placements. Your ordered width will be the width of the cassette at the top of the shade. However, the fabric portion of roller shades is always narrower than the ordered width, and will not extend to the edges of the trim. Conversely, having the width of the fabric equal the width of your window trim will mean the top of the shade will extend beyond the width of the window trim.
  • Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim.  That is your ordering width. 
  • Note that the fabric portion of the shade will be narrower than your ordered width.

Height: 

  • Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height.

Width:

  • Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the shade about 2" wider for better light control.

Height:

  • Consider how far above the window trim piece you would like to install your shade but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the shade to be, using the same extra space below the window trim piece as you used above. That is your ordering height.

Note: We carry complimentary hold-downs (door brackets) which can be requested during the ordering process. These should be installed for a successful door mount as they secure the shade at the bottom of the door so that it does not swing when the door opens and closes. Note that the fabric vanes can be rotated but the shade cannot be raised when door brackets are installed.

How to Install

How to Install: Inside Mount

Let's make sure you have what you need!  

What came with your blinds?

  1. Mounting brackets*
  2. 1 ½" Screws (two per bracket)
  3. Screws for Tension Device (if Continuous Chain Operation ordered)
  4. Remote Control Kit (if ordered)

What else will you need in order to complete the installation?

  1. Rechargeable drill (use 3/32" drill bit to predrill screw holes & use ¼" drill bit for wall anchors, if needed)
  2. ¼" hex driver
  3. Phillips screwdriver
  4. Pencil
  5. Tape measure
  6. Ladder

*Quantity will vary depending on width. 

Download the PDF below for a complete step by step guide on how to install your inside mount blinds and for more information on how many brackets are required for your order. 

Download printable instructions (PDF) (opens in a new tab)

How to Install: Outside Mount

Let's make sure you have what you need!  

What came with your blinds?

  1. Mounting brackets*
  2. 1 ½" Screws (two per bracket)
  3. Extension Brackets (if ordered)
  4. Spacer Blocks (if ordered)
  5. Screws for Tension Device (if Continuous Chain Operation ordered)
  6. 6 Channel Remote Control (if ordered)

What else will you need in order to complete the installation?

  1. Rechargeable drill (use 3/32" drill bit to predrill screw holes & use ¼" drill bit for wall anchors, if needed)
  2. Phillips screwdriver
  3. Pencil
  4. Tape measure
  5. Ladder

*Quantity will vary depending on width. 


Download the PDF below for a complete step by step guide on how to install your outside mount blinds and for more information on how many brackets are required for your order. 

Download printable instructions (PDF) (opens in a new tab)

Read More About This Product

Light Filtering Sheer Shades for Elegant Living

Our LEVOLOR 3 Inch Light Filtering Sheer Shades are more than just window coverings; they’re a design upgrade. These light-filtering sheer shades softly diffuse sunlight during the day while preserving your view. At night, the filtering sheer shades can be closed to provide enhanced privacy without making the area feel dark or heavy.

Unlike traditional blinds, which rely on tilting slats, these sheer shades combine layers of delicate material with adjustable vanes. This dual design gives you the best of both worlds: gentle light filtering and sheer fabric. Whether in your living room, dining area, or office, these shades create a beautiful atmosphere that instantly elevates your home.

Style and Design Flexibility

Every home has its own personality, and these light-filtering sheer shades are built to match yours. Available in a wide range of colors, they blend seamlessly with any style, from modern minimalism to classic traditional interiors. Their clean lines and neutral palette make them a versatile statement piece for your décor, complementing both subtle and bold design choices.

Pick sheer shades for a soft, airy look, or pair them with draperies for added texture and sophistication. Whether you want to highlight your windows or make the shades the focal point of the room, these coverings provide unmatched versatility and timeless appeal.

Perfect for Large Openings

Thanks to their oversized 3-inch vanes, LEVOLOR 3 Inch Light Filtering Sheer Shades are especially well-suited for larger-size windows, including wide picture windows. Unlike standard blinds, which can feel bulky, the design of LEVOLOR 3 Inch Light Filtering Sheer Shades maintains a streamlined look.

Install them on windows large and small to enjoy filtered sunlight throughout the day without sacrificing convenience. With smooth cordless or motorized operation, opening and closing the shades over a door is effortless, safe, and stylish.

Add Style to Every Room

Want to make a design statement? LEVOLOR 3 Inch Light Filtering Sheer Shades are the perfect solution. Their unique combination of sheer fabrics and adjustable vanes creates a dramatic effect that sets them apart from other blinds or standard window coverings.

Whether placed in a formal dining room or a cozy bedroom, the shades add refinement and comfort. Their style and the glowing light filtering through sheer effects make them an essential element of any thoughtfully designed space.

Related Videos

  • LEVOLOR Custom Sheer Shadings - Features & Benefits

  • How to Measure for LEVOLOR Inside Mount Blinds and Shades

  • How to Measure for LEVOLOR Outside Mount Blinds and Shades

  • LEVOLOR® Blinds and Shades - Quality Time

Questions & Answers (2)

Reviews4.0out of 5based on 1 reviews

Customers also bought (24" × 36")