- Value of Product
- 5 out of 5
- Quality of Product
- 4 out of 5
- Ease of Installation
- 5 out of 5
Arbutis, Detroit, US ·
Shown in Shadow GreySuper Value Cordless Light Filtering Single Cellular Shades
Made to order, ships in 3–5 business days.
Unbeatable Price Guarantee
Color: Shadow Grey
Mount: Inside Mount
Inside MountInside mount shades are installed inside the window opening. Enter the exact size of the window opening NOT the size of the shade. The factory will make a small deduction from your width to allow space for the hardware and operation.
Outside MountOutside mount shades are installed outside the window opening to trim, a wall, or a door. Enter the exact size of the shade you want to order. The factory will make no deductions.
Important
- Minimum depth for Inside Mount is 1 ½ inches for Standard Installation; 3 inches for EZ Mount
- An outside mount application will be necessary if your window does not meet the minimum depth requirement
- Inside Mount width deduction is approximately ¼"
- Top mount only
Size: 24" W × 36" H
Measurements to the nearest 1/8 inch.
Fit or Free Guarantee. If for any reason your window coverings don't fit, even if you make a mistake in measuring, we'll remake them in the size you need free of charge.
Lift: Not selected
CordlessSimply grab the bottom rail to lift and lower your blind or shade.
Installation Type: Not selected
Optional
Standard InstallationMount shades using screws and brackets directly into the window frame, wall, or ceiling.
EZ-Mount InstallationMounts shades using tension-based headrail - no screws or drilling required.
Name your window
Optional
Quantity1
Pay over time with 
at checkout.
Total$—
From our customers
Real windows, in real homes
Product Information
Add an instant upgrade to your home at an unbeatable price with this high-value cellular shade. When lowered, the single honeycomb layer gently filters sunlight into the room while helping to insulate your home against heat and cold. You'll also love the clutter-free and kid-safe cordless lift.
- Budget-Friendly!
- No Lift Cords
- Great For Narrow Windows!
This shade is the best kind of home upgrade: easy, affordable, and transformative. Our Super-Value Cellular Shades are indeed a super value – aluminum headrail and bottom rail, a long-lasting cordless mechanism, high insulation value and simple good looks. The pleated fabric cells are constructed to hold their shape over repeated use and they are easy to clean. Plus the cord-free construction means easy operation, worry-free child safety, and an uncluttered look in the window. All this at fantastic prices – that's what we call a super value!
Get to know this shade:
- Soft yet durable non-woven 100% polyester light filtering fabric is white on the back (facing outside)
- Color coordinated aluminum rails and clear cordless lift handles
- R-value of 3.50 provides high insulation against both heat and cold for year-round energy efficiency
Why you'll love this shade:
- Cordless lift is included standard for simple operation – gently push or pull on the bottom rail to raise or lower the shade
- 3/4" fabric pleats are well-proportioned for an uncluttered look, especially in larger windows
- Light filtering fabric gently diffuses light while still providing privacy, and stacks neatly at the top of the window when raised
- Easy and secure installation with included snap-in brackets
- Best for Kids™ certification designates this blind as safe for use in homes with young children
Key considerations:
- Shade is raised by pushing up on the bottom rail – be sure you can reach as high in the window as you would like to raise your shade
- For additional sizes or lift control options, consider our Deluxe Light Filtering Cellular Shades
Great for:Living RoomBedroomOfficeKitchenDining RoomRvEntry WayUtility Room
- Child & Pet Safety
- Privacy
- Insulating/Energy Efficient
Made to order, ships in 3–5 business days.
Key Features
Superior Fabric Construction
3/4" single cell layer made from 100% polyester works to softly filter light while still maintaining privacy.
Cordless Lift
The easiest (and safest) way to control your shade. With no unsightly cords or buttons, simply grab the bottom-rail with your hand to lift and lower.
Snap-In Brackets
Top mount brackets snap in easily for a seamless installation.
Specifications & Restrictions
- Width
- 12 1/4" – 84"
- Height
- 12" – 84"
- Min depth for inside mount
1 ½ inch (Standard Installation) 3 inches (EZ Mount Installation)
- Depth required for flush mount
2 1/8 inches (Standard Installation) 3 inches (EZ Mount Installation)
- Min flat space for outside mount
1 ½ inches
- Headrail size
1 1/8 inches height x 1 7/8 inches depth
- Inside Mount Width Deduction
Approximately ¼ inch
Restrictions
- Cordless is the only available lift type
- 2 on 1 headrail option is not available
- Side Mount not available for Inside Mount, top mount only
- EZ Mount not available for Outside Mount
How to Measure
How to Measure: Inside Mount
3 min read
Let's make sure an inside mount will work for your window! Using a metal tape measure, first check if you have sufficient depth:
- Standard Installation: Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. The depth at the top of the window must be at least 1 ½" to mount the brackets. To have a flush mount (meaning the shade is fully recessed in the window opening) the depth must be at least 2 1/8". If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.
- EZ-Mount Installation: Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. The depth at the top of the window must be at least 2 ¼" to mount the brackets. To have a flush mount (meaning the shade is fully recessed in the window opening) the depth must be at least 2 ¼".
How to Measure:
Let's start with the Width:
- Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8". That is your ordering width.
Now, let's do the Height:
- Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.
Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/4" to your shade's width to allow room for installation and for proper movement of the shade within the window opening. No deductions will be made to your height.
How to Measure: Outside Mount
3 min read
Before you start measuring, decide where above your window opening you want to mount your shade. You will need at least 1 1/2" of flat vertical space above the window to mount the brackets. The shade can be installed directly above the window opening, or higher up to give the appearance of a larger window and to have more clear space in the window when the shade is raised.
If you have trim around the window, you can mount the shade above the trim, directly on the trim (if you have the required minimum flat space for the brackets), or to the sides of the trim if you do not have enough mounting space above the window or on the trim itself. See the directions below for how you'd like to install your shade.
If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.
Width:
- Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2" on each side of the window opening for the best light control and appearance.
- Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.
Height:
- Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. The shade can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the shade is raised.
- Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.
Width:
- Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2" on either side of the window opening for the best light control and appearance. You can also choose to have the shade the same width as your window trim.
- Using a metal tape measure, measure from left to right including any desired extra space on each side of the window—that is your ordering width.
Height:
- Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. The shade can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the shade is raised.
- Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.
Note: This product is not available with spacer blocks. We recommend considering another product for instances where the shade needs to project away from the wall to clear the window trim.
Width:
- Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim. That is your ordering width.
Height:
- Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height.
Width:
- Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the shade about 2" wider for better light control.
Height:
- Consider how far above the window trim piece you would like to install your shade but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the shade to be, using the same extra space below the window trim piece as you used above. That is your ordering height.
Note: This product is not available with hold down brackets (for attaching the bottom of the shade to the door to prevent swaying). We recommend considering a different product if installing on a door where the bottom of the shade is likely to swing back and forth.
How to Install
How to Install: Inside Mount
2 min read
Let's make sure you have what you need!
What came with your blinds?
- Installation brackets
- #6 hex head screws (one per bracket mounting hole)
- Cordless lift handle
What else will you need in order to complete the installation?
- Rechargeable drill
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder
*If applicable to your order.
Download the PDF below for a complete step by step guide on how to install your inside mount blinds and for more information on how many brackets are required for your order.
How to Install: Outside Mount
4 min read
Let's make sure you have what you need!
What came with your blinds?
- Installation brackets
- #6 hex head screws (one per bracket mounting hole)
- Cordless lift handle
What else will you need in order to complete the installation?
- Rechargeable drill
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder
*If applicable to your order.
Download the PDF below for a complete step by step guide on how to install your outside mount blinds and for more information on how many brackets are required for your order.
Related Videos
Product Expert Review - Blindster Super Value Cordless Light Filtering Single Cellular Shades
Blindster EZ-Mount
How to Measure for Inside Mount Cellular Shades
How to Measure for Outside Mount Cellular Shades
Cellular Shades - The Choice for Maximum Versatility
How to Install - Super Value Cordless Light Filtering Single Cellular Shades
How They're Made - Cellular Shades