- Value of Product
- 5 out of 5
- Quality of Product
- 5 out of 5
- Ease of Installation
- 5 out of 5
Virginia, Olympia, US ·
Shown in Cool WhiteLEVOLOR Light Filtering Single Cellular Shades
Made to order, ships in 5–7 business days.
Unbeatable Price Guarantee
Color: Cool White
Mount: Not selected
Inside MountInside mount shades are installed inside the window opening. Enter the exact size of the window opening NOT the size of the shade. The factory will make a small deduction from your width to allow space for the hardware and operation.
Outside MountOutside mount shades are installed outside the window opening to trim, a wall, or a door. Enter the exact size of the shade you want to order. The factory will make no deductions.
Size: 24" W × 36" H
Measurements to the nearest 1/8 inch.
Fit or Free Guarantee. If for any reason your window coverings don't fit, even if you make a mistake in measuring, we'll remake them in the size you need free of charge.
Lift Type: Not selected
CordlessSimply grab the bottom rail to lift and lower your blind or shade.
Continuous Cord LoopContinuous Cord Loop provides a clean look and features a cord that loops around a tensioning mechanism attached to the wall or window frame. Pulling this cord hand over hand in a continuous fashion allows you to easily lift and lower large or heavy shades.
Cordless Top Down Bottom UpCordless Top-Down/Bottom-Up shades eliminate the need for lift cords; simply use the attached handles to lift your shade from the bottom up, lower it from the top-down, or a combination of both.
Battery-Powered MotorizedEfficiently raise and lower your shade with Motorized Lift. Perfect for hard-to-reach windows, a battery-powered remote is all that is needed to lift and lower your shades.
Battery Powered Motorized Top Down/Bottom UpEfficiently raise and lower your Top Down/Bottom up shade with Motorized Lift. Perfect for hard-to-reach windows, a battery-powered remote is all that is needed to operate your shades.
LEVOLOR Hub: Not selected
No Hub
LEVOLOR HubSyncs with Wi-Fi to enable app control and smart home integration.
Installation Type: Not selected
Optional
Standard InstallationMount shades using screws and brackets directly into the window frame, wall, or ceiling.
EasyMount InstallationQuick and easy installation. Simply lock headrail into place and attach the LEVOLOR shade.
Door Brackets (Hold Downs): Not selected
Optional
Yes Door BracketsThese are used when outside mounting to a door. The brackets secure the bottom rail of the blinds to the door in order to prevent swaying.
No Door BracketsDoor Brackets (Hold Downs) are not required for the normal operation of this product.
Extension Brackets: Not selected
No
Extension brackets are not required for the normal operation of this product.
4" Extension Bracket
Name your window
Optional
Quantity1
Pay over time with 
at checkout.
Total$—
From our customers
Real windows, in real homes
Product Information
Rely on LEVOLOR cellular shades to keep your home warmer in winter and cooler in summer! This light filtering shade features large 3/4" cells for great insulation and even better looks. Customize your shade in your choice of size, color and with the lift option best suited for your needs and enjoy year-round energy savings.
- 3/4" Single Cell Layer
- Smart Option: Motorized
Our customers rely on LEVOLOR brand cellular shades to provide excellent insulation and brilliant good looks. LEVOLOR combines years of industry-leading experience with new innovation to bring you the best shades on the market. These light filtering shades feature a single 3/4" cellular design that traps air to provide year-round insulation in the window and providing complete privacy. You can customize not only the size and color to perfectly fit your window and room, but also choose the lift option that's right for your needs. Sleek and convenient cordless works great for most rooms, but we also offer cord loop for taller windows, and even motorized shades for the ultimate in convenience. Add top down bottom up operation for extra flexibility for light control and privacy – available in both cordless and motorized configurations!
Get to know this shade:
- 3/4" single cell honeycomb design provides an insulating barrier in the window
- All shade colors feature a white back to provide a neutral appearance from the street
- Painted aluminum headrails are color coordinated to the shade fabric
Why you'll love this shade:
- LEVOLOR brand shades feature a century of quality and industry-leading performance
- The large 3/4" cell size is well proportioned even for larger windows
- Cordless lift option eliminates all dangling cords for an uncluttered look and child-safe design
- Motorized lift options are available in standard bottom up or with top-down/bottom up operation
- Add the InMotion hub to integrate motorized shades into your home automation system or use the LEVOLOR app
- All shade styles conform with the current child safety regulations
Key considerations:
- When choosing cordless lift, be sure you can easily reach as high as the top of the window frame; otherwise consider an alternate lift option
- A hub is required to control motorized shades with the LEVOLOR app or home automation
- Privacy
Made to order, ships in 5–7 business days.
Key Features
Cordless Lift
Grab the small clear handle to adjust the shade as needed.
Insulating/Energy Efficient
Insulating/Energy Efficient
Motorization
Efficiently operate your shades with the optional 15-channel battery powered remote.
Child & Pet Safety
Child & Pet Safety
Specifications & Restrictions
- Width
- 16" – 96"
- Height
- 6" – 96"
- Min flat space for outside mount
1 ½ inches
- Min depth for inside mount
1 ¼inch (Standard Installation) & 3 inches (EasyMount Installation)
- Depth required for flush mount
2 1/8 inches (Standard Installation) 3 inches (EasyMount Installation)
- Headrail size
1 ½ inch height x 2 1/8 inches depth
- Inside Mount Width Deduction
Approximately ¼ inch headrail deduction and 3/8 inch fabric deduction
- Outside Mount
Fabric is made 1/8" less than width ordered; headrail will arrive at ordered width
- Bottom Rail Size (for all lift types)
½" high x 1 7/8" deep
- Remote Control Range (Motorized lift)
98 feet
- Easy Rechargeable Feature (Motorized Lift)
Powered by an integrated, rechargeable lithium-ion battery
- 15 CHANNEL REMOTE CONTROL REQUIRED TO OPERATE MOTORIZED SHADES
Remote will only operate LEVOLOR motorized roman shades; other Blindster remotes will not operate the shades
- Charger Required To Operate Motorized Shades
At least 1 charger needs to be ordered
*Recharge time on a shade is 5 hours, chargers are not meant to be plugged into the shade long term.
Restrictions
- Motorized lift on cellular shades is not compatible with the motorized lift on our Solar, Roller, or Zebra Sheer Shades
- Side Mount not available for Inside Mount, top mount only
- Continuous Cord Loop will come in 6" increments based on shade height. Cord Loops start at 18" drop.
- EasyMount not available for Outside Mount
How to Measure
How to Measure: Inside Mount
3 min read
Let's make sure an inside mount will work for your window! Using a metal tape measure, first check if you have sufficient depth:
- Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. The depth at the top of the window must be at least 3/4" to mount the brackets. To have a flush mount (meaning the shade is fully recessed in the window opening) the depth must be at least 2 1/8". If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.
- 3" of depth is needed at the top of the window opening if ordering the EasyMount headrail.
How to Measure:
Let's start with the Width:
- Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8". That is your ordering width.
Now, let's do the Height:
- Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.
Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/4" to your shade's headrail and 3/8" to the fabric width to allow room for installation and for proper movement of the shade within the window opening. No deductions will be made to your height.
How to Measure: Outside Mount
3 min read
Before you start measuring, decide where above your window opening you want to mount your shade. You will need at least 1 1/2" of flat vertical space above the window to mount the brackets. The shade can be installed directly above the window opening, or higher up to give the appearance of a larger window and to have more clear space in the window when the shade is raised.
If you have trim around the window, you can mount the shade above the trim, directly on the trim (if you have the required minimum flat space for the brackets), or to the sides of the trim if you do not have enough mounting space above the window or on the trim itself. See the directions below for how you'd like to install your shade.
If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.
Width:
- Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2" on each side of the window opening for the best light control and appearance.
- Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.
Height:
- Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. The shade can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the shade is raised.
- Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.
Width:
- Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2" on either side of the window opening for the best light control and appearance. You can also choose to have the shade the same width as your window trim.
- Using a metal tape measure, measure from left to right including any desired extra space on each side of the window—that is your ordering width.
Height:
- Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. The shade can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the shade is raised.
- Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.
Note: We provide complimentary extension brackets upon request. These are used in conjunction with the standard installation brackets to position the shade away from the wall and prevent the shade from hitting the frame. Extension brackets add up to 4" of additional depth for installation.
Width:
- Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim. That is your ordering width.
Height:
- Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height.
Width:
- Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the shade about 2" wider for better light control.
Height:
- Consider how far above the window trim piece you would like to install your shade but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the shade to be, using the same extra space below the window trim piece as you used above. That is your ordering height.
Note: We carry complimentary hold-downs (door brackets) which can be requested during the ordering process. These should be installed for a successful door mount as they secure the shade at the bottom of the door so that it does not swing when the door opens and closes.
How to Install
How to Install: Inside Mount
2 min read
Let's make sure you have what you need!
What came with your blinds?
- Installation brackets
- Clear handle (cordless lift types only)*
- 1 handle for shades 42" or less
- 2 handles for shades greater than 42"
- Cord tensioner bracket & instruction pack (cord loop lift only)*
- #6 hex head screws (one per bracket mounting hole)
- Remote (motorized only; if ordered)*
- Hub (motorized only; if ordered)*
What else will you need in order to complete the installation?
- Rechargeable drill with 3/32" drill bit & ¼" hex nut driver bit
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder
*If applicable to your order.
Download the PDF below for a complete step by step guide on how to install your inside mount blinds based on your lift type and for more information on how many brackets are required for your order.
How to Install: Outside Mount
4 min read
Let's make sure you have what you need!
What came with your blinds?
- Installation brackets
- Clear handle (cordless lift types only)*
- 1 handle for shades 42" or less
- 2 handles for shades greater than 42"
- Cord tensioner bracket & instruction pack (cord loop lift only)*
- Extension Brackets*
- Hold down brackets*
- #6 hex head screws (one per bracket mounting hole)
- Remote (motorized only; if ordered)*
- Hub (motorized only; if ordered)*
What else will you need in order to complete the installation?
- Rechargeable drill with 3/32" drill bit & ¼" hex nut driver bit
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder
*If applicable to your order.
Download the PDF below for a complete step by step guide on how to install your outside mount blinds based on your lift type and for more information on how many brackets are required for your order.
Related Videos
Introduction to LEVOLOR Cellular Shades
Levolor EasyMount
LEVOLOR Custom Cellular Shades - Features & Benefits
How to Measure for LEVOLOR Inside Mount Blinds and Shades
How to Measure for LEVOLOR Outside Mount Blinds and Shades